01-021/05 2004 - 2005 MAZDA3 - ENGINE VIBRATION / NO.3 ENGINE MOUNT RUBBER BROKEN

APPLICABLE MODEL(S)/VINS

2004 -) 2005 Mazda3 with VINs lower than JM1 BK**** 51 263353 (Produced before December 10, 2004)

DESCRIPTION

Some vehicles may experience engine vibration. This symptom could be observed under any condition such as accelerating, idling, and/or engine hot or cold.

The No. 3 engine mount rubber has been modified to address this concern.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1. Verify concern.

2. Replace No.3 engine mount rubber with a modified part according to Workshop Manual (section 01-10 TIMING CHAIN REMOVAL/INSTALLATION).

3. Verify repair.

PART(S) INFORMATION

Part Number	Description	Qty.	Notes
BP4S-39-060D	No. 3 Engine Mount Rubber (2.0L)	1	-
B32T-39-060B	No. 3 Engine Mount Rubber (2.3L)	1	-

WARRANTY INFORMATION

NOTE:

• This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair. Refer to the Warranty Wizard for warranty term information.
• Additional diagnostic time cannot be claimed for this repair.